DeepSeek Harness 網頁 UI 軟體套件，非人為中斷後自動發送「繼續」——含錯誤分類、自適應退避、迴圈 / 冪等保護與 GUI 設定卡片，讓 agent 會話自行復原。
DSH 整合
原生執行環境
作者聲明
安全稽核
未稽核
最後核實
2026-09-02
授權條款
MIT
01它能幫你完成什麼？
Automatically resume a DeepSeek Harness (dsh web) session after a non-human interruption — network error, timeout, or host crash — without manual re-sending.
A “Continue” message is injected into the session log exactly like a manual prompt, so the interrupted agent work resumes on its own.
DeepSeek Harness web-UI users running long or unattended agent sessions that get dropped by network errors or host restarts.
Break a running DeepSeek Harness turn out of a stuck loop (repeated messages or spinning tools) without a manual stop.
The loop guard cancels the stuck turn and restarts it with a configurable loop-break message, so the agent tries a different approach.
Users whose dsh web agent sessions get stuck repeating the same action and would otherwise need a manual interruption.
02如何將外掛接入 DeepSeek Harness？
先決條件
- DeepSeek Harness (dsh) web installed — the README recommends the latest DSH (0.1.2-alpha.1 or newer); run `dsh --version` before installing.
- For a from-source build: Node.js ≥ 18.
安裝步驟
- 01
Install from npm into the web profile: `dsh plugin --profile web add dsh-client-auto-continue`
$ dsh plugin --profile web add dsh-client-auto-continue
- 02
Start the web UI: `dsh web`. The plugin loads into the web profile and is ready after restart.
$ dsh web
驗證整合成功
- Confirm the config layer mounted: `dsh --profile web --dump-config | grep auto-continue`
- Open the browser console (Ctrl/Cmd+Shift+I) and look for the `[auto-continue] 已启动(…)` startup log on each detection and auto-send.
復原
- Remove the plugin: `dsh plugin --profile web remove dsh-client-auto-continue`
- Restart the web UI: `dsh web`.
03DSH 整合程度與能力邊界
Installs into the dsh web profile (dsh plugin --profile web add); the engine runs inside the dsh host process and reacts to the session event firehose.
Automatic Continue on interruption
Interruption / error event from the dsh web session firehose→A “Continue” (or templated) message sent through the agent registry (agent.followup), the same queue the Send button uses
Writes sessions.prompt via the agent registry (agent.followup) — the same call the Send button makesError classification & adaptive backoff
Failure event (HTTP status / error code / message)→Transient failures (network / timeout / 5xx / 429) auto-resumed with increasing cooldown; permanent ones (auth, balance, model, context-length) skipped and notified
Loop guard
Running-turn event stream→Cancels a looping turn and restarts it with a configurable loop-break message
GUI-configurable settings card
Toggles and fields in Settings → Plugins → Plugin configuration→Live config persisted to ~/.dsh/settings.yaml (idempotency guard, pause, stats, notifications)
04適合誰？何時不該用？
適合
- DeepSeek Harness web-UI users running long or unattended agent sessions that get dropped by network errors or host restarts.
- Users whose dsh web agent sessions get stuck repeating the same action and would otherwise need a manual interruption.
不適合
- Requires DeepSeek Harness 0.1.0-rc.7 or newer; rc.6 and earlier are unsupported because the plugin needs the registry-driven web settings surface. Latest DSH (0.1.2-alpha.1+) is recommended.
05相容性、維護與安全提醒
- Requires DeepSeek Harness 0.1.0-rc.7 or newer; rc.6 and earlier are unsupported because the plugin needs the registry-driven web settings surface. Latest DSH (0.1.2-alpha.1+) is recommended.
- Browser-only: it touches no files, credentials, or network beyond the dsh host. Its only automatic write is sessions.prompt — the same call the Send button makes.
- Only English (en) and Chinese (zh) UI text are supported; any other browser language falls back to Chinese.
MIT · actively maintained (latest release v0.11.0, 2026-09-01)
06常見問題
怎麼把 dsh-auto-continue 裝進 DeepSeek Harness 網頁端？
執行 `dsh plugin --profile web add dsh-client-auto-continue`，再啟動 `dsh web`。套件裝進 web 設定檔，安裝後重啟 dsh web 即可載入。
我自己中止請求時，它會自動續跑嗎？
不會。使用者主動中止（aborted）或策略拒絕（blocked）的回合絕不會自動續跑；它只復原網路錯誤、逾時、或崩潰殘留等非人為中斷（由啟動掃描找回）。
怎麼確認套件真的載入了？
執行 `dsh --profile web --dump-config | grep auto-continue` 確認設定層已掛載；再開啟瀏覽器主控台（Ctrl/Cmd+Shift+I），每次偵測與自動發送都會印出 `[auto-continue] 已启动(…)` 啟動日誌。
它會重試鑑權或配額這類永久錯誤嗎？
預設不會。錯誤分類會自動續跑瞬時失敗（網路 / 逾時 / 5xx / 429），跳過永久失敗（401/403、鑑權、餘額 / 配額、未知模型、上下文溢出）並通知你。若某提供商的報錯重試確實安全，可加窄匹配的字面可重試模式。
套件會讀取我的檔案或存取外部服務嗎？
不會。它純屬瀏覽器側，不碰宿主之外的檔案、憑證或網路；唯一的自動寫入就是和發送按鈕相同的 sessions.prompt 呼叫。
07相關的 DSH 工作流程
dsh-web
作者 zhu1090093659
DeepSeek Harness (DSH) Web 外掛聚合生態 · 萬物皆外掛，通過創意工坊分發｜｜DeepSeek Harness (DSH) Web Plugin Aggregation Ecosystem · Everything is a plugin, distributed via the Creative Workshop
petdex
作者 crafter-station
面向 Codex、Claude Code、DeepSeek Harness 等智慧體的動效寵物公共相簿。
deepseek-balance-whale-widget
作者 meteornox
DeepSeek Harness（DSH）一隻住在 DSH 介面右下角的小鯨魚娘，幫你盯著DeepSeek賬戶餘額。QQ彈彈，支援拖拽吸附、左吸附翻轉、數字滾動動畫，隨介面自動啟用，建議直接喊來你的dsh安裝
j-space-cognition-suite
作者 tiger3807861189
面向深度推理、長程工作、驗證與恢復的模型無關推理時控制工具集，藉助全域性工作空間思路增強智慧體工作流。
08資料與來源
DSH Web UI plugin — when a request is interrupted by a network error or any other non-human cause, it automatically send…
DSH plugins install into a **profile** (`dsh web` → `web` profile). Install, restart `dsh web`, done.
此頁面根據專案公開文件、儲存庫中繼資料與 DSH Plugins 的結構化解析所產生；最後核實於 2026-09-02。發現錯誤？提交更正。
最佳 DeepSeek Harness 外掛
從全目錄挑出的 12 個值得優先安裝的外掛，涵蓋各個分類。