MIT-licensed DSH desktop plugin that reverse-proxies the official web GUI onto the local network behind a password gate, keeps settings and credentials host-only, and pins itself to DSH desktop 0.2.2-rc.3.
DSH integration
Native runtime
Author-claimed
Safety audit
Unaudited
Last verified
2026-11-18
License
MIT
01What can it help you accomplish?
Open the same DeepSeek Harness session from a phone, tablet or another computer on the LAN
The official DSH web interface served over the LAN through the plugin's built-in reverse proxy, behind a password gate; the host machine itself still opens without a password
DSH desktop users who want to keep a session running on the desktop and follow it from a phone or tablet in the same network
Keep working from another device without handing it the dangerous pages
Chat, model and working-mode switching, workspaces / sessions, history, tasks, approvals and the terminal work from a LAN device; settings, permission presets, credentials and preset management stay host-only
Users who want remote convenience but do not want credentials or permission presets editable from a phone
Use the official narrow-screen UI on a phone with a stable address
The official mobile-width interface with no extra setup, plus an optional fixed LAN port (1024–65535) applied from the settings card instead of the port DSH assigns each start
Mobile users who do not want to re-read a changing address every time DSH restarts
02How to install into DeepSeek Harness
Prerequisites
- DSH desktop 0.2.2-rc.3 — `engines.dsh` is pinned exactly, other versions are refused
- A phone, tablet or second computer on the same LAN as the host
Installation steps
- 01
On the DSH sidebar, open the Plugins page and install the package `dsh-lan-tool` by name.
- 02
Fully quit the desktop app and reopen it — the node half is only loaded at startup.
- 03
Open 设置 → General →「局域网访问」, set the access password (at least 4 characters) first, then turn the switch on.
Verify the integration
- Once the switch is on, the settings card lists the usable LAN addresses; open `http://<本机IP>:<端口>` from the other device and enter the password.
Rollback
- Remove the plugin on the Plugins page — the LAN listener stops immediately and firewall rules plus patch leftovers are cleaned up after about 8 seconds.
- To clear the password as well, delete `%USERPROFILE%\.dsh\dsh-lan.json`.
03DSH integration and capability boundaries
Native DSH desktop plugin: it is installed from the Plugins page by package name, registers a 设置 → General →「局域网访问」card, and runs its own reverse proxy in the desktop app's node half so LAN devices reach the official DSH web UI behind a password gate.
Built-in reverse proxy with a password gate
the password set in Settings → General → 局域网访问 (at least 4 characters) and the LAN address of the host→the full DSH web interface for any device that presents the password; host-side requests are always let through
opens a listening socket on the machine's current LAN interface addressa Windows firewall prompt may appear the first timeSettings card with addresses and a pin-able port
the 局域网端口 field (1024–65535)→the list of usable LAN addresses plus the clean URL to open, and a port that survives restarts once applied
writes the chosen port into the plugin configurationCapability matrix for LAN devices
a LAN device holding the password→chat, model / working-mode switching, workspaces, sessions, history, tasks, approvals and terminal; settings, permission presets, credentials and preset management are refused; workspace directory picking uses the plugin's own picker
Official narrow-screen layout on phones
a phone or tablet browser→DSH's own mobile-width interface — the plugin adds no separate mobile UI
04Who is it for? When not to use it?
Good for
- DSH desktop users who want to keep a session running on the desktop and follow it from a phone or tablet in the same network
- Users who want remote convenience but do not want credentials or permission presets editable from a phone
- Mobile users who do not want to re-read a changing address every time DSH restarts
Not for
- Version 1.7.2 only supports DSH desktop 0.2.2-rc.3 — `engines.dsh` is pinned exactly, so any other DSH version is refused at install / enable time. Older DSH builds need the matching older plugin from Releases.
- Anyone who holds the password can read and write all of that DSH's data, so set a strong password and only enable the switch on a trusted network — turn it off on public networks.
- The plugin only listens on the machine's current LAN interface address — never a wildcard address — and turning the switch off stops the external listener immediately.
- The node half is only loaded at startup: after installing or upgrading, fully quit the desktop app and reopen it. Upgrading DSH does not re-add `dsh.profile.bundles`, so if the card disappears or `/dsh-lan/status` 404s, re-enable the plugin on the Plugins page and restart again.
05Compatibility, maintenance and safety notes
- Version 1.7.2 only supports DSH desktop 0.2.2-rc.3 — `engines.dsh` is pinned exactly, so any other DSH version is refused at install / enable time. Older DSH builds need the matching older plugin from Releases.
- Anyone who holds the password can read and write all of that DSH's data, so set a strong password and only enable the switch on a trusted network — turn it off on public networks.
- The plugin only listens on the machine's current LAN interface address — never a wildcard address — and turning the switch off stops the external listener immediately.
- The node half is only loaded at startup: after installing or upgrading, fully quit the desktop app and reopen it. Upgrading DSH does not re-add `dsh.profile.bundles`, so if the card disappears or `/dsh-lan/status` 404s, re-enable the plugin on the Plugins page and restart again.
MIT · README on branch main · latest release v1.7.2 (2026-11-16)
06Frequently asked questions
Which DSH version does dsh-lan-tool 1.7.2 accept?
Only DSH desktop 0.2.2-rc.3. `engines.dsh` is pinned exactly, so other versions are refused at install / enable time — older DSH builds need the matching older plugin from Releases.
Why is there no card in settings after I install or upgrade?
The node half is only loaded at startup, so fully quit the desktop app and reopen it. After a DSH upgrade the plugin is also no longer in `dsh.profile.bundles`; re-enable it on the Plugins page and fully restart again. If a reinstall left `- id: dsh-lan-tool` with `disabled: true` in the profile patch, delete those lines and refresh.
What can a device on the LAN actually do?
Chat, model and working-mode switching, workspaces and sessions, history, tasks, approvals and the terminal all work. Settings, permission presets, credentials and preset management are host-only — change those on the host machine. Workspace directory picking uses the plugin's own picker.
The phone keeps saying "reconnecting" — what happened?
DSH assigned a new port on restart. Refresh the page, or pin the port: fill in 局域网端口 (1024–65535) on the card and press 应用端口. A stale `?token=` in the address also produces `dsh web authentication required…`; use the clean address from the card instead.
How do I uninstall it and wipe the password?
Remove it on the Plugins page. The LAN listener stops immediately, and firewall rules plus patch leftovers are cleaned up after about 8 seconds. To clear the password too, delete `%USERPROFILE%\.dsh\dsh-lan.json`.
07Related DSH workflows
dsh-uumit-remote
by uumit-ai
Connect to DSH from another device and selectively share the remote instance with invited users.
dsh-auto-review
by perrylink
Second-model AI auto-review for DeepSeek Harness approval requests: a read-only reviewer subagent returns structured allow/deny verdicts with reasons, fail-closed by default, fully auditable from the session log (approval/asked -> autoReview/verdict -> approval/decided).
cc-safety-net
by kenryu42
A pre-execution guard for AI coding agents. It blocks destructive Git and file system commands, plus common attempts to access sensitive files, before a tool call runs. Supports Amp Code, Antigravity CLI, Claude Code, Codex, Cursor, DeepSeek Harness, Devin CLI, GitHub Copilot CLI, Grok Build, Hermes Agent, Kimi Code, OpenClaw, OpenCode, and Pi.
dsh-permission-rules
by perrylink
Claude Code-style declarative permission rules for DeepSeek Harness: ordered allow/deny/ask rules with tool-name, argument (glob/regex), and workspace-path matching on the tools/pre-execute waterfall, session-log audit, and HMR reload.
08Data and sources
带口令的全功能版 · 插件内置反向代理 · 主机免口令 · 手机/平板直接用官方界面
在 DSH 侧栏 **Plugins** 页输入包名 **`dsh-lan-tool`** 安装;
This page is generated from the project’s public documentation, repository metadata and a structured parse of DSH Plugins; last verified on 2026-11-18. Found an error? Submit a correction.
Best DeepSeek Harness Plugins
Twelve plugins worth installing first — picked from the whole catalog, across every category.
